ROLL LABELS

This is an item we can’t give you exact pricing on, we give you a price quote based on what you want!

Clear BOPP, White BOPP, White textured Estate #8, White vinyl (Indoor/Outdoor). Full Color.

CHECK OUT THE SPECIAL SHAPES WE CAN PRINT

Sizes

1.5 inch Diameter
2 inch Diameter
2.5 inch Diameter
3 inch Diameter
4 inch Diameter
6 inch Diameter
1.5 x 2.5 inches
1.1 x 2.75 inches
2 x 3.5 inches
2 x 2 inches
3 x 3 inches
4 x 6 inches

Paper

14Pt. Gloss Cover
14pt. Uncoated Cover
16pt. Premium Matte
24Pt. Trifecta Green with Velvet Finish
100LB. Recycled Matte Cover
60LB. Gloss Cover

Paper

Gloss
Matte

Pages

8 – 80 pages
4 Pgs for Cover, the rest inside

File Format:
We accept the following file formats: .TIF, .TIFF, .EPS, .AI, .PSD, .JPG, .PNG & .PDF.

After we receive your uploaded file(s), we will review each file. If we find any problems, we’ll contact you; otherwise you’ll receive a PROOF of your job on the internet to review within 24 hours (1 business day.)

Resolution:
All file formats must have a minimum of 350 dpi (dot per inch) resolution at 100% of the final print size.

Images designed for the web typically cannot be used for printing as they have a low screen resolution of 72 dpi. Print images need to be created at 350 dpi or there will be a substantial drop in the image quality.
e.g. 3.5″x 2″ Business Card resolution: 350 dpi (1260 pixels x 735 pixels)
e.g. 6″x 4″ Postcard resolution: 350 dpi (2135 pixels x 1435 pixels)

Color Mode:
All color artwork and/or images must be provided in CMYK (cyan, magenta, yellow, black) color mode.
All black & white artwork and/or images must be provided in grayscale color mode.

Bleed:
For roll labels, please build your print-ready digital files by adding 0.1875″ bleed to each dimension (or 0.09375″ bleed on all four sides for square or rectangle roll labels). For example, a 1″ x 1″ roll label with the full bleed should be 1.1875″ x 1.1875″

The adhesive is a type of glue on the back of the label, which with slight pressure applied, makes the label stick to the substrate (the surface to which the label is applied). Available adhesive types are removable, permanent, repositionable, etc., in acrylic or solvent (rubber based.) Currently, GotPrint is offering a General Purpose permanent acrylic adhesive.

A label with this adhesive cannot be removed without the label being destroyed or leaving residue on the object that it was applied to. This adhesive generally adheres well to most corrugated, paper and plastic substrates but is not guaranteed to work for every application. Labels with this general purpose permanent adhesive can be applied at temperatures as low as 25 degrees – 35 degrees F. It has a service temperature range of -50 degrees to + 150 degrees F.

GRAPHICS AND DIGITAL LABEL PRINTING:
Digital label printing uses the standard four-color process as with other types of printing. Files should be created using CMYK color. All files submitted as RGB will be converted, which may cause color shifts. If would like to guarantee accurate color reproduction, please provide files using the CMYK values from a Pantone Process Coated Color Guide. Printed colors are always different from what is represented on a computer monitor. Even PDF proofs are not an accurate representation of color. It is very important that you use a Pantone guide if exact color representation is important on your finished label.

Our digital press utilizes four-color process (CMYK). While we cannot print an actual PMS spot color, we can print a close approximation to 95% of all Pantone colors.

When creating your file, remember press gain is not an issue with our digital press and there are no trapping requirements. The press will print utilizing a maximum of 812 dpi. Also, the press normally prints utilizing a 180 line screen, but can print a line screen as high as 230. Currently the press does not support fluorescent or metallic inks.